Category: Musical Instruments

The Reggaeton Riddim Case: Give the Drummer Some!

I spoke with Ivan Moreno over at IPLaw360 this week about the copyright litigation that could have a major impact on reggaeton, the popular modern blend of hip-hop, Latin, and Caribbean music. Here’s the link to Ivan’s article.

In this huge lawsuit consolidating over 50 cases, Cleveland “Clevie” Browne and other plaintiffs sued more than 160 defendants for copyright infringement. Plaintiffs claim to be the original creators of he distinctive dembow rhythm that’s become a signature of reggaeton music.

They allege that some 1,800 reggaeton songs infringe Jamaican producers Steely & Clevie’s 1989 hit “Fish Market” because they made unauthorized use (either by sampling or copying) of the song’s “riddim,” which is named after Shabba Ranks’ 1990 single “Dem Bow,”

Most of the reporting focuses on the potential impact to the reggaeton genre and whether a “beat,” and more particularly, a “genre-defining” beat is or should be protectable by copyright. But to me that framing is something of a red herring that obscures a fundamental truth about copyright.

Nobody would question that a performance of an original musical composition on a melodic and harmonic instrument like guitar or piano is protectable by copyright. I also think no one would doubt that an original solo recording on a single-note instrument (e.g., sax, trumpet, flute, trombone) can be protected by copyright. 

But when it comes to drums or percussion, where the harmonic and melodic elements are stripped away, our assumptions change. Many people run into a a psychological hurdle acknowledging the protectability, or even existence, of a musical composition when melody is absent from music. 

But it should be an absolutely uncontroversial proposition that a rhythm-only musical composition or recording consisting of exclusively or mostly drums and/or percussion is protectable by copyright, so long as the work is original and has the requisite modicum of creativity. With the harmonic and melodic instruments, each is doing what that instrument can do; that is the same for the drum kit and percussion. 

For starters, the drum kit includes several different “instruments”: bass drum, snare, cymbals, hi-hat, toms, maybe cowbell. Percussion instruments offer endless variation, e.g. tympani, timbale, tambourine, triangle, claves, etc. And, of course, the rhythmic patterns the drummer/percussionist can play also are infinitely varied, with the individual pieces playing different rhythms (usually at the same time), and different kinds of sounds, timbres, etc. 

Plaintiffs try to make this case and even included a score in their summary judgment motion to show how complex the “beat” is in Fish Market:

The top half of the score shows the drum and percussion parts. Seven pieces go into creating the Fish Market “riddim”, and, aside from the hi hat and kick drum, each of the other parts is different.

This demonstrates the complexity of the “riddim” as the high and low timbale, tambourine, synth tom, hi-hat, snare, and kick drum are all playing together in particular way. Indeed, this begins to look like a musical composition, not simply a “beat”  (Of course, calling it a “beat” exacerbates the above-mentioned psychological hurdle).

Whether the drum or percussion composition (the “beat”) goes on to define a genre is irrelevant to the infringement analysis.  If the work is sufficiently creative and original to be protected by copyright and others copy it, that’s infringement, whether it’s a flash in the pan that immediately fades away or subsequent artists make it hugely popular and it comes to define a genre.

I said to Ivan, even though there’s no legal need, it would be nice for a court decision to acknowledge the originality and creativity of a drum/percussion composition. I have many drummer friends and colleagues, and I’m all for increased recognition of their creativity. As I often say during a session or gig, give the drummer some!

String Theory: Larsen’s New String Production Patent

Larsen strings are considered to be quite good, especially for viola and cello. Musicians like their warm, bright tone, strong projection, and good responsiveness.

The Danish company, Larsen Strings, recently obtained a U.S. patent for its string fabrication apparatus and process. Bearing the punchy title “Method for fabicating a string, in particular a string for a bowed musical instrument, and an apparatus for carrying out the same,” U.S. Patent No. 12,281,437 (437 Patent) issued April 22, 2025.

A string for a bowed musical instrument such as a violin or cello typically consists of a core material with one or more layers of winding materials.

According to the ‘437 Patent, the compactness of the core and the winding layers is an important property of a string. If a string lacks compactness, the core and the winding layers are not sufficiently interlocked, and when the string is under tension, the layers may shift relative to one another, leading to poorer string response. The goal of the patented fabrication method is to produce strings with increased compactness.

The ‘437 Patent is directed to a method and apparatus for fabricating a string (110) where a compactness increasing module (120) applies both a friction force and a compression force to a winding strand (4) at the spinning point (7) as the strand is wound around a cylindrical core (3).

String fabricating apparatus (100) produces a string (110) having a core (3) with at least one winding strand (4) helically wound around the core. The apparatus (100) rotates the core (3) and winds the strand (4) around the core as the core rotates.

The compactness increasing module (120) contacts the winding strand (4) at a spinning point (7) when the strand is wound onto the core (3) so a friction force and a compression force are introduced at the spinning point.

The friction force increases the friction between the compactness increasing module (120) and the winding strand (4), and the compression force compresses the winding strand (4) and the core (3).

According to their website, Larsen strings made by the patented process produce a consistently perfect bow response and an accurately calibrated sound.

Trippy: Casio’s Patent-Pending Dimension Tripper Allows Pedal Control with Guitar Strap

If you’re a guitarist (or play with a guitarist) you know the deal. Before counting off a musical number, as the band reaches a transition in a tune, or just before a guitar solo starts, the eyes shift to the board on the floor, search for the pedal for the desired sound or effect, and the front of the shoe clicks on the button of the chosen pedal.

That common sequence of events may soon become a thing of the past. Casio’s Dimension Tripper allows you to control your guitar pedals with your strap. It may be the only wireless expression controller available that can be operated with the guitar strap.

Casio’s patent application for the system, published February 13th, provides a peek behind the curtain at how the Dimension Tripper works.

U.S. Patent Application Publication No. 2025/0054471 is entitled “Electronic apparatus for musical instruments” and directed to a playing system (1) where a change in tension applied to the strap (210) sends a signal that results in the guitar playing a particular sound or effect.

Playing system (1) includes an effector apparatus (100), an electric guitar (200), and a guitar amplifier (300). The electronic apparatus (10) is located between the guitar strap (210) and the electric guitar (200).

The effector apparatus (100) has an effect unit (120) connected to an electrical signal input unit (110), an electrical signal output unit (130), and a control signal input unit (140). Electrical signals (sound signals) travel from the electric guitar (200) to the electrical signal input unit (110).

The electrical signal output unit (130) is connected to the guitar amplifier (300). The electrical signal output from the electrical signal output unit (130) is eventually emitted from the guitar amplifier (300) in the form of sound.

When the guitar player presses the electric guitar (200) downward to apply a tension to the strap (210), a rotational shaft (41) of a rotation detection device (40) rotates in accordance with the tension applied to the strap (210).  A rotation amount of this rotational shaft (41) is detected by the rotation detection device (40) and is sent to the receiver (150) as a control signal so the effector apparatus (100) can be controlled.

The effect unit (120) applies various types of effects e.g., wow, distortion, etc., to the electrical signal input from the electrical signal input unit (110), and the resulting electrical signal is output by way of the electrical signal output unit (130).

Thus, the Dimension Tripper is essentially an expression pedal. But unlike other forms of expression controllers where the guitarist rocks a pedal back and forth with his foot or slides a fader back and forth with her hand, the guitarist pulls down on the guitar itself to change the tension in the strap.

You can see how it works in this video by engadget from the NAMM show.

Going on a Bender

Glaser Instruments is a Nashville company that makes specialized pitch benders for guitars. The bender can be in the form of a lever arm attached to the neck plate or a saddle installed under the bridge plate (both shown and explained here).

Glaser benders come in a few varieties; for the G or B string, convertible G/B strings, or you can go for broke and get yourself a double bender for both the G and B strings.

Glaser benders are protected by a family of at least seven patents, and the company filed another patent application in April that recently published as U.S. Patent Application Publication No. 2024/0274104 (‘104 Application).

The original bender patent application was filed back in 2018, and Glaser filed a series of continuation applications over the last several years. A continuation application enjoys the benefit of the original patent application’s filing, or priority, date and draws from the original application’s disclosure to pursue different protection by way of newly drafted claims.

Titled “Musical instrument pitch changer and related methods,” the ‘104 Application is directed to a pitch changer system (10) having a lever assembly (12), a lever tensioning system (18), and a rotating saddle assembly.

The pitch changer system is configured to be mounted to the body of a guitar. The lever assembly has a lever (20), and applying force to move the lever (20) forces the rotating saddle assembly into rotation to elongate. That temporarily changes the pitch of one of the strings of the guitar.

You can check out several videos of the Glaser bender being used by professional guitarists on Glaser’s home page here. Sounding great!

Reactional is Leveling the Playing Field for Musical Composition

Reactional Music Group (Reactional) is a Swedish music tech company that provides products for generative musical composition.

Reactional recently got a patent relating to its generative music engine and delivery platform. Issued July 2, 2024, U.S. Patent No. 12,027,146 is entitled “Instrument and method for real-time music generation” (‘146 Patent).

The invention of the ‘146 Patent is designed to enable interactive musical experiences for users who might have only minimal musical training.

The virtual instrument has a real-time input device (RID) (1), which could be a touch screen or gesture, motion, or eye-tracking device, and/or vocal input systems such as a pitch detector.

The instrument contains a musical rule set unit (7) that stores rule definitions (701) including a composer input and a set of instrument properties. These are combined with a control signal (2) generated by the RID block based on the real-time input of the user/composer (3) as an individual or a network of musicians.

A pitch generator (9) creates an output signal (8) representing music and synchronizes generated tones based in time and frequency, and an audio generator (11) converts the output signal and combines it with the instrument properties into an audio signal (10).

A musical transition handler (703) manages transitions between different sections in the generated music based on musical characteristics according to user/composer input.

The instrument properties and rule definitions (701) are combined with the real-time control signal (2), resulting in note trigger signals (6) associated with time and frequency domain properties.

According to Reactional’s website, its “patented generative music engine and delivery platform open up a new era of music personalisation, a faster and more efficient method to create and prototype music for developers, and for the first time, music as an in-game purchase.”

U.S. Patent No. D1,022,025:  Legere’s Reed Case

This post is about a subject near and dear to my heart: saxophone reeds. Legere is a Canadian company that makes woodwind reeds and accessories.

Last month, Legere was issued a design patent on one of its reed cases.  U.S. Patent No. D1,022,025 claims the ornamental design for the reed case as shown below (among other variations).

The embodiment of FIG. 15 most closely resembles the reed case I found for sale on eBay:

Unlike utility patents, which protect functional features (how the invention works), design patents protect purely ornamental or aesthetic features of a device.

I gave up using reed cases a while ago in favor of small Nalgene water bottles.  Though they require regular cleaning and freshening, I find keeping the reeds wet improves my saxophone sound a lot and extends the life of the reeds.